Nonin Sensors - 8000A

8000A

Reusable Finger Clip Pulse Oximetry Sensors

The Nonin 8000A Reusable Finger Clip Pulse Oximetry Sensors are designed for short-term monitoring and spot checks in environments where the risk of cross-contamination is low. Built with Nonin PureLight® sensor technology and PureSAT® signal processing, the 8000A Series provides consistent, accurate readings from patient to patient and sensor to sensor.

‍

PureSAT® SpO₂ Technology

PureSAT uses intelligent, pulse-by-pulse filtering to ensure accurate measurements, including in patients with darker skin tones.
‍

Adult and Pediatric Sizes

- Available in two patient-specific models:

- 8000AA for Adult Patients (>30 kg / >66 lbs)

- 8000AP for Pediatric Patients (10–40 kg / 22–88 lbs)
‍

Immediate Response

The sensor delivers near-instant oxygen saturation and pulse rate measurements as soon as it is applied.
‍

Precision When It Matters Most — PureLight® Sensor Technology

PureLight LEDs are engineered to deliver specific wavelengths and light intensities without secondary emissions. This eliminates variation across patients and sensors, ensuring consistent and dependable measurements.
‍

Durability Advantage (8000AA Model)

Independent laboratory testing comparing the Nonin 8000AA to competitive “Nonin-compatible” finger clip sensors (Envitec, Unimed, and Cables & Sensors) demonstrated that the 8000AA offered the highest durability among the products tested.
‍

8000A Series Technical Specifications

SpO₂ Accuracy

Range        Oxygen Saturation (Arms*)        Motion Oxygen Saturation (Arms*)

70–100%        ±2        ±3

70–80%        ±2        ±3

80–90%        ±2        ±3

90–100%        ±2        ±2
‍

8000AA Sensor Specifications

Low Perfusion Accuracy

- SpO₂: 70–100% ±2 digits (Arms*)¹

-Pulse Rate: 18–300 BPM ±3 digits (Arms*)¹

- Pulse Rate Low Perfusion: 40–240 BPM ±3 digits (Arms*)¹

Temperature

- Operating: –20 °C to 50 °C (–4 °F to 122 °F)

- Storage/Transport: –40 °C to 70 °C (–40 °F to 158 °F)
‍

8000AP Sensor Specifications

Low Perfusion Accuracy

- SpO₂: 70–100% ±2 digits (Arms*)¹

Pulse Rate Accuracy

- Standard: 40–240 BPM ±3 digits (Arms*)¹

- Motion Accuracy: 40–250 BPM ±5 digits (Arms*)¹

- Low Perfusion Accuracy: 40–240 BPM ±3 digits (Arms*)¹

Temperature

- Operating: –20 °C to 50 °C (–4 °F to 122 °F)

- Storage/Transport: –40 °C to 70 °C (–40 °F to 158 °F)
‍

Humidity (Both Models)

- Operating: 10% to 95% non-condensing

- Storage/Transport: 10% to 95% non-condensing

*±1 Arms represents 68% of the population at zero bias.

Additional accuracy and performance information is available in the operator’s manual CD.

Accuracy specifications are based on Nonin PureSAT® SpO₂ and PureLight® sensor technologies.

For combined oximeter/sensor specifications, refer to the specific oximetry system manual.

Range tested with Nonin PureSAT® SpO₂ technology.
‍

Measurement Wavelengths & Output Power

- Red: 660 nm @ 3 mW nominal

- Infrared: 910 nm @ 3 mW nominal

Useful for clinicians performing photodynamic therapy.
‍

Compliance

- Complies with ISO 10993

Not made from natural rubber latex

‍