Nonin CO-Pilot

Nonin CO-Pilot™

Wireless Handheld Multi-Parameter System (H500)

Emergencies can occur in any environment, and unreliable measurements can place both patients and clinicians at risk. You need equipment you can rely on, so your attention stays focused on the lives depending on you. The Nonin CO-Pilot™ Wireless Handheld Multi-Parameter System is designed to reliably measure COHb, MetHb, SpO₂, pulse rate, and rSO₂, even under challenging conditions, so you can trust what you’re holding.

‍

Trust What’s in Your Hands

Reliable Readings

Provides accurate COHb and SpO₂ measurements, including in the presence of hypoxia and CO poisoning.

Designed for Rugged Conditions

Meets or exceeds ISO EMS standards for medical devices.

Highly Compatible

Accepts Nonin SpO₂, rSO₂, and multi-parameter SenSmart sensor types.

Multiple Parameters at Once

A proven, durable sensor enables simultaneous measurement of SpO₂, pulse rate, COHb, and MetHb.

Wireless Patient Screening

Patient readings are transmitted wirelessly from the sensor to the display at distances of up to 30 feet (10 m).

Multi-Parameter Display

The display presents multiple parameters along with a pleth waveform.

Hassle-Free Operation

A grab-and-go system with the display and signal processor pre-paired.

Highly Flexible

The system can also be used to monitor rSO₂ during resuscitation, ECMO, or anesthetized transport.

Rechargeable Battery

A fully charged battery supports up to 10 hours of operation.
‍

CO-Pilot Product Features

Reliable Screening for Carbon Monoxide Poisoning

The NFPA reports annual firefighter injuries ranging from 60,000 to 80,000 cases, with 13% related to carbon monoxide poisoning. Whether treating firefighters during fire rehabilitation or patients presenting symptoms of CO poisoning, dependable COHb readings are critical for clinical decision-making.

Advanced Technologies for Pre-Hospital Settings

Previously, noninvasive cerebral oxygenation measurement was not available in a simple handheld wireless format. Building on advanced hospital-based rSO₂ technology, Nonin developed a customized handheld wireless solution for pre-hospital use in resuscitation, ECMO, anesthetized transport, stroke, seizure, and other applications.

Nonin PureSAT® Technology

The CO-Pilot enables fast, accurate, and cost-effective spot checks of oxygen saturation and pulse rate in pediatric through adult patients. Nonin PureSAT® technology automatically adapts to patient conditions to deliver consistent measurements, even in demanding environments.

Accessories

- SenSmart Multi-Sensing 8330AA — 112280-001

- SenSmart Compatible 8100AA Adult Finger Clip Sensor — 10352-001

- SenSmart Compatible 8100AP Pediatric Finger Clip Sensor — 10360-001

- SenSmart Compatible 8100Q2 Ear Clip Sensor — 10342-001

- SenSmart Compatible 8204CA Regional Oximetry Sensor — 10433-001

- SenSmart Compatible 8004CB Pediatric Regional Oximetry Sensor — 9749-001

- SenSmart Compatible 8004CB-NA Pediatric Non-Adhesive Regional Oximetry Sensor — 9750-001

- Intermediate Cable (INT-100) — 10535-002

- CO-Pilot Power Supply — 114078-001

- CO-Pilot Carrying Case — 114079-001

CO-Pilot Specifications

Display Ranges

- %COHb: 0–99%

- %MetHb: 0–99%

- %SpO₂: 0–100%

- %rSO₂: 0–100%

- Pulse Rate: 18–321 BPM

Sensor Accuracy

Refer to the applicable sensor Instructions for Use (IFU) for accuracy information.

Measurement Wavelengths & Output Powerᵃ

Refer to sensor IFU for details.

Memory

Minimum 280 hours
‍

Environmental Conditions

Temperature

- Operating: 0 °C to 40 °C (32 °F to 104 °F)

- Transient Operatingᵇ: −20 °C to 50 °C (−4 °F to 122 °F)

- Storage/Transportation: −40 °C to 70 °C (−40 °F to 158 °F)

Humidity

- Operating: 15% to 93% non-condensing

- Transient Operatingᵇ: 15% to 90% non-condensing

- Storage/Transportation: Up to 93% non-condensing

Altitude

- Operating: 0 to 4,000 meters (13,123 feet)

Power Requirements

Mains Power

100–240 VAC, 50–60 Hz

Internal Power

- D-HH Battery: 3.8 V Li-ion, 3600 mAh

- SP-BLE Battery: 3.7 V Li-ion, 1260 mAh

Battery Capacity*

Approximately 10 hours of continuous operation

(*from a fully charged new battery measuring SpO₂, PR, COHb, and MetHb)

Battery Capacity After Storage

- Standby for 1 week: ~4 hours continuous operation*

- Off for 1 month: ~8 hours continuous operation*

Charging Time*

- D-HH: ~3 hours

- SP-BLE: ~9 hours

(*from critical battery level)

ᵃ Useful for clinicians performing photodynamic therapy

ᵇ Minimum of 20 minutes operation under extreme environmental conditions
‍

Physical Characteristics

Dimensions

- D-HH: 97 × 178 × 21 mm (3.8 × 7.0 × 0.8 in)

- SP-BLE: 23 × 28 × 89 mm (0.9 × 1.1 × 3.5 in)

Weight

- D-HH: 330 g (11.6 oz)

- SP-BLE: 90 g (3.2 oz)
‍

Warranty

- D-HH Display & SP-BLE Signal Processor: 2 years

- Battery: 1 year
‍

Standards & Classification

- IEC 60601-1 / CAN/CSA-C22.2 No. 601.1 / UL60601-1

- Type of Protection: Internally powered (battery); Class II with AC adapter

- Mode of Operation: Continuous

Ingress Protection (Carrying Case)

- D-HH, SP-BLE: IP33

Wireless Communication

- Bluetooth Low Energy

- Bluetooth Version: 4.2 or later

- Output Power: <8 dBm

- Operating Range: 9.1 m (30 ft), line-of-sight

- Antenna: Internal